Raspberry-Pi on Jackenhack

Shairport Crashing When Using USB DAC with Raspberry Pi

Tue, 26 Mar 2019 00:00:00 +0000

I’ve moved over from Squeezebox server to Roon as my multi-room music playback system. The new system works wonderfully, and I love it. However, there’s one thing that I’ve had a problem with, and that’s getting Apples AirPlay to work reliably with my Roon Raspberry Pi endpoints running Diet-Pi Linux. The Shairport-sync constantly crashed. After searching around the net, I found a solution to my problem.

HifiBerry DAC+ Click When Changing Song

Fri, 06 Apr 2018 00:00:00 +0000

My current music setup is a Raspberry Pi 3 with a HifiBerry DAC+ audio card as my music player. It works perfectly, except for one annoying thing. The new HifiBerry DAC+ makes an audible click or poping sound when changing the sampling rate. I have a lot of recordings in higher resolution than CD-quality of 16-bit 44kHz, so it’s jarring when it happens. I like to play my music loud which exacerbates the problem. But there’s an easy solution, and at the same time, you can get better sound quality overall. Here’s how to fix the problem.

DietPi Makes Your Raspberry Pi a Lean Mean Linux Machine

Thu, 13 Apr 2017 00:00:00 +0000

My wild guess is that most people get a small Linux computer, like the Raspberry Pi, BeagleBone, Banana Pi or Orange Pi for a specific task. Unfortunately, most distributions are chock-full of software, with everything installed per default. But if you want to set up a lean single board computer for a specific task, you’re out of luck. Thankfully there is a Linux distribution, DietPi, that aims to fix that problem.

Raspberry Pi 3 Overclocking Heatsink Cheap

Sat, 17 Dec 2016 00:00:00 +0000

I needed a cheap heatsink for my Raspberry Pi 3 that I use as a music player/server. To maximize performance, I wanted to overclock the computer for faster searching and handling of all my music. I’ve managed to overclock my central Stratum-1 NTP server to 1350MHz without any problems, but the dinky little aluminium heatsink was way to anaemic, so I found a very cheap DIY solution to my question. With this heatsink, I can run the Raspberry Pi 3 at 1.5GHz all day at full tilt without any issues!

Raspberry Pi 3 Overclocking Enclosure

Sun, 31 Jul 2016 00:00:00 +0000

[caption id=“attachment_4974” align=“alignright” width=“400”] Raspberry Pi 3 Overclocking Case Enclosure[/caption]

The results are in: I’ve been very busy with different projects, and one of them requires a custom enclosure. So I thought it would be an excellent excuse to learn Fusion 360. When the Raspberry Pi 3 came out, I did some overclocking experiments. But I settled with just passive cooling with some small aluminum heatsinks. But after seeing some tests done with a more massive copper heatsink combined with a cooling fan, I decided that I wanted to build a case with a silent fan with enough room for a large heatsink. I need it for my NTP server at ntp.jacken.se to get better performance.

Raspberry Pi Stratum-1 NTP Server Statistics

Tue, 12 Apr 2016 00:00:00 +0000

After becoming a full-fledged time-nut (I’m compiling a new Linux kernel on my second NTP server as we speak), I have started to use the statistics that I usually install on a server just to keep a check on it. Sure, when installing something like MRTG, it’s great to see if something is clogging the system, but mostly, it’s unused. But when working with an NTP server a lot of factors start to make a difference. The temperature of the processor (the whole computer actually, mostly due to crystal drift), the load of the CPU’s, etc.

Raspberry Pi 3 Overclocking

Wed, 02 Mar 2016 00:00:00 +0000

Warning: as of yet, there is no official support for overclocking the Raspberry Pi 3, so you could damage your small computer. Just a reminder.

Update: I’ve managed to make a DIY heatsink for the Raspberry Pi 3 for $4, and it’s running stable at 1.5GHz. Click here to read.

The new version of Raspberry Pi 3 was released yesterday, so I naturally had to get two. I’m using two as Stratum-1 NTP servers, and with the old Raspberry Pi 2, I had hit the roof when it came down to getting better time resolution. So when I read that a new 50% faster version had been released, I raced to the nearest store and got a couple. I have one experimental NTP server that isn’t handing out time on the internet and another one that is the primary server, connected to the NTP Pool Project.

I installed the experimental Raspberry Pi 3 first, so I could test performance and try to overclock it. And it went very well.

Increase Pulse Width 1 PPS signal from GPSDO

Thu, 28 Jan 2016 00:00:00 +0000

Update: You can download the Eagle PCB files for the PPS Pulse Width Extender here. The PCB is made to fit the Hammond 1455C802BK enclosure.

I have two Stratum-1 NTP servers using Raspberry Pi 2’s as servers. But the two setups are entirely different. My primary NTP Stratum-1 server is available at ntp.jacken.se, but it is also in the .se pool of ntp.org. It’s a Raspberry Pi 2 I use a Raspberry Pi 3 that I have connected a U-Blox Neo-7 GPS receiver. But I’m not using the 1 PPS signal coming out of the U-Blox. I have a Trimble GPSDO that I bought from eBay. The unit has two 10 MHz lab reference outputs and one 1 PPS output. But after measuring the signal coming out from the GPSDO, I realized that the timing speed for the seconds “Tick” was only 10 µsec which is way to fast for the Raspberry Pi to pick up as an interrupt on one of the GPIO pins. So I built a pulse extender, making the pulse around 250 milliseconds instead. And now the Raspberry Pi picks up the pulse without problems. Some GPSDO units can set the pulse width by programming the unit via a serial port, but I can’t find that feature on this unit (which is poorly documented and was OEM made for some other manufacturer), so I had to do it with hardware. So how does it look when crunching the numbers on it?

Raspberry Pi NTP Server LCD Status Display

Tue, 12 Jan 2016 00:00:00 +0000

The last couple of weeks I’ve been busy building a Raspberry Pi 2 Raspberry Pi 3 connected to my Trimble GPSDO using the 1 PPS output. The Trimble unit synchronizes with the atomic clocks onboard the GPS satellites, and the precision is fantastic! I bought the GPSDO to get a 10 MHz lab reference for my measure equipment, but after reading an article about Time-Nuts, people obsessed with measuring time as accurately as possible, and one of my friends showed me pictures of their new Stratum-1 NTP server rack he helped design, I was hooked.

Raspberry Pi Car Audio System

Mon, 23 Jun 2014 00:00:00 +0000

My Raspberry Pi Car Audio Player

A lot of people are using the excellent Linux microcomputer Raspberry Pi and install it in their cars. Usually, they use a color screen that is touch sensitive, being able to play back video and music. But I’m only interested in high-quality audio playback, being able to have all my CDs in lossless FLAC format for optimal sound quality. So a 16x2 LCD with some buttons is plenty. I now have a working system (but not yet installed in my car.) here’s a description of how I’ve built it. Most of the installations I’ve seen the use of the audio out from the Raspberry Pi, but it’s only 11-bit and sounds like crap. I want to use an external DAC, and you can get that to work in XBMC, but only menu and music output, not films. There are some HDMI to audio converters, but I’ll instead use a quality USB DAC.

http://youtu.be/wzmFZlpbBCQ

Raspberry Pi Samba Showing Wrong Size Mounted USB Disk

Thu, 30 May 2013 00:00:00 +0000

After setting up a SMB Samba share on my Raspberry Pi in Squeezeplug, the size of the mounted volume showed the size of the SD-card instead of the USB hard disk. To fix it, I had to change the setup for Samba. Here’s what I did to fix it.

Raspberry Pi Car Computer

Fri, 17 May 2013 00:00:00 +0000

Update: You can find my latest update on the progress of my Raspberry Pi Car Audio System here.

I’m working on a Raspberry Pi as a music player in my car. I’m putting all my music on a SSD disk in lossless FLAC. I’ve already got hold of a 2x16 character LCD with six button from Adafruit that only uses two pins for communication with I2C. It’s easy to program and it has four different background colors.

Raspberry Pi avahi-daemon disabled because there is a unicast .local domain - solved

Sat, 06 Apr 2013 00:00:00 +0000

When setting up a Raspberry Pi with SqueezePlug, my favorite distribution for setting up a music server I always get the error message “avahi-daemon disabled because there is a unicast .local domain” because I have a lot of Apple equipment configured with Bonjour. To fix it, all you need to do is to edit /etc/default/avahi-daemon and change the line:

AVAHI_DAEMON_DETECT_LOCAL=1

AVAHI_DAEMON_DETECT_LOCAL=0

then restart the Avahi-daemon with

sudo service avahi-daemon restart

Problem solved.

How to use interrupts with Python on the Raspberry Pi and RPi.GPIO » RasPi.TV

Tue, 19 Mar 2013 00:00:00 +0000

How to use interrupts with Python on the Raspberry Pi and RPi.GPIO » RasPi.TV:

We’ve finally got interrupt capability on the Raspberry Pi for GPIO programming in Python using RPi.GPIO.

Interesting! Saving this link for later experimenting. Need buttons for my Carputer Raspberry Pi.

Via Scoop.it!

Secure browsing on iOS (iPhone/iPad) using OpenVPN and the Raspberry Pi

Thu, 14 Mar 2013 00:00:00 +0000

Secure browsing on iOS (iPhone/iPad) using OpenVPN and the Raspberry Pi « Remi Bergsma’s blog:

When I’m not at home I use my iPhone or iPad and connect to the internet using either 3G or public wifi. I want to configure my mobile device to setup an encrypted VPN tunnel and route all traffic through it, so I have a safe browsing experience. Fortunately, there now is an OpenVPN app available on iOS that allows you to do that! Please install this app using the App Store, and continue reading to set it all up.

Raspberry Pi as a Squeezebox Logitech Server

Sat, 22 Dec 2012 00:00:00 +0000

I love my music playback setup that consists of a couple of Squeezebox V3 players in different rooms so I can listen to music in lossless format wherever I am in the apartment. With the iPeng HD app on my iPad, I have a nice interface for controlling the players with album art and other nice features. But the best part is that I can playback high resolution audio directly on my iPad using the Camera Kit USB adapter and an HRT HeadStreamer DAC portable USB headphone amplifier. But I wanted a small, cheap and eco-friendly server for hosting my music files and wondered if I could use the Raspberry Pi. And here’s my findings.