DIY Coaxial Collinear Antenna for ADS-B SDR Receiver – Measuring The Cable

Thu, 26 Oct 2017 00:00:00 +0000

[caption id=“attachment_5818” align=“alignright” width=“300”] My first attempt of a Collinear Antenna. Professional mounting![/caption]

Part 1 – Checking the Velocity Factor of the Coax Cable

I have a homebuilt Collinear Antenna on one of my two ADS-B receivers. It’s an eight element antenna, built without any real effort of making sure that all the elements where the right length. So it’s about time to try to do it properly. The easy way is to get Flightaware’s great ADS-B antenna and filter, but it’s fun to build your own as well.

To build a good antenna, you would preferably use a Vector Network Analyzer so you can do proper measurements of your antenna design. With it you can quickly check stuff like SWR and optimize the impedance of the antenna at the frequency it’s intended to be used. In my case 1090MHz for ADS-B. But if you don’t have the money to spend, you have to improvise. I’m going to build a 12 element Collinear Antenna out of cheap RG-58 coax cable. But to calculate the right length of each element, we need to know the Velocity Factor, or the signal speed through the cable compared to light traveling in a vacuum. So let’s do the measurements.

Ads-B on Jackenhack

DIY Coaxial Collinear Antenna for ADS-B SDR Receiver – Measuring The Cable

Part 1 – Checking the Velocity Factor of the Coax Cable